Samsung SCC-931T User Guide - Page 8

00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 14 Preparing Cables The following cables are required to install and use the SCC-931T(P). Power Adapter Cable The power adapter that plugs into the SCC-931T(P)'s power input receptacle has the rated voltage of DC 12V 600mA or AC 24V 300mA. Video Cable The cable that connects the video output terminal of the SCC-931T(P) to the monitor is a BNC cable. 14 Installing SCC-931T(P) For installing directly on a ceiling 1. Choose an installation site that can sufficiently support the weight of the equipments to be installed. 2. Attach the supplied template to the installation site, drill pilot holes (5 mm diam eter, min. 35 mm depth), and then install and secure the supplied plastic anchors (HUD 5). 3. Connect the power cord and video cable, and arrange them so that they will not be damaged or caught when installing the CAMERA. 4. Remove the DOME COVER to install the CAMERA. 1) 1) Use the supplied L WRENCH to unfasten the 4 BOLTS for CASE fixing by turning them counterclockwise as shown in the illustration. 2) Disassemble the ASSY-DOME in the direction shown in the illustration. 5. Install the CAMERA. Align the CAMERA's installation holes to the holes where the PLASTIC ANCHORS are inserted and then fasten the ASSY SCREWTAPPINGS (TH M4 X 30) with O RINGS. (2 spots) (It will not be waterproof without O RINGS.) 2) 15 ➜ SAMSUNG