Samsung SCC-931T User Guide - Page 14

00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 26 CAMERA MENU Organization CAMERA ID In the CAMERA ID menu, you can assign an ID to the SCC-931T(P) that appears on the screen of the monitor which is connected to the SCC-931T(P). In the setup menu screen, if you set the CAMERA ID to ON... and press the [ENTER] key, a submenu screen where you can assign an ID to the SCC-931T(P) will appear. You can use alphanumeric characters and a few special characters, which are shown on the submenu screen, to assign a maximum of 12 characters tor the CAMERA ID. You can use the LOCATION submenu to place the assigned CAMERA ID at a certain location on the monitor. CAMERA ID IRIS AUTO FOCUS SHUTTER MOTION WHITE BAL SYNC SPECIAL MOTION DET EXIT ON... ALC... AF AUTO X8 F.FAST ATW INT ... OFF QUIT When you press the [ENTER] key (CAMERA ID) ABCDEFGHIJKL MNOPQRSTUVWX YZ 0123456789 SP SP LOCATION... RET SCC-931T.... ☛ "..." means that there is a submenu. IRIS The level of video output to the monitor can be controlled by the IRIS lens according to the intensity of the incoming light. The SCC-931T(P) is basically equipped with an IRIS lens. In the ALC (Auto Light Control) menu, you can set the video output level. In the MANU... menu, you can manually set the opening and closing of the iris. 26 ➼ ALC (Auto Light Control) If you set the IRIS to ALC and press the [ENTER] key, a submenu screen where you can set the video output level and BLC will be displayed. In the LEVEL item, you can use the [LEFT/RIGHT] keys to set the video output level. If you set the BLC menu to ON, the BLC function will be applied to the screen area specified in the AREA menu. The AREA menu, where you specify the screen area to which the BLC function will be applied, can be set to PRESET or USER. If you set the AREA menu to PRESET, the BLC function will be applied to the area specified at the time of factory shipment. If you set the AREA menu to USER and press the [ENTER] key, users can specify the area to which the BLC function will be applied. CAMERA ID IRIS AUTO FOCUS SHUTTER MOTION WHITE BAL SYNC SPECIAL MOTION DET EXIT OFF... ALC... AF AUTO X8 F.FAST ATW INT ... OFF QUIT When you press the [ENTER] key (ALC) AREA BLC LEVEL(0) RET PRESET... OFF ----|---- ➼ BLC (Back Light Compensation; a submenu of the ALC/MANU... menu) If you use an ordinary camera when a strong light source, such as a spot light, is shining from behind the subject, the subject will appear dark on the monitor because of the back light. In order to solve the problem of back light, the SCC931T(P) appropriately sets the BLC, which is a submenu of the ALC/MAN, to enable you to have a clear video under any light source. 27