Samsung SCO-2080R User Manual - Page 12

Operating Your Camera (Black, Red, Blue, Cyan, Magenta) - TOP/BOTTOM/LEFT/RIGHT :Adjust the area to be enhanced OFF : Not being used 3. Select a desired mode using the Function Setup switch and press the Function Setup switch. S elect 'BLC' to adjust the area to be enhanced then adjust the level. HLC : E nable the user to change the level, limit, mask color/tone and area. LOW Notes • B ecause there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. • W hen dark, the HLC is only activated when a bright light exceeding a specific size in NIGHT ONLY mode. • T he HLC is not activated in day light or when bright light is not present at night in NIGHT ONLY mode. • BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu. SSNR3 This function reduces the background noise in a low luminance environment. 1. When the SETUP menu screen is displayed, select 'SSNR3' by using the Function Setup switch so that the arrow indicates 'SSNR3'. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.SSDR OFF 5.BACKLIGHT OFF 6.SSNR3 ON 7.DAY/NIGHT AUTO 2. Select a desired mode using the Function Setup switch. OFF: Deactivates SSNR3. Noise is not reduced. O N : Activates SSNR3 so that noise is reduced. 3. Set the SSNR3 mode to 'ON' and press the Function Setup switch. Then you can adjust the noise reduction level. Notes • Y ou cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is 'OFF'. • W hen adjusting the noise reduction level in the SSNR3 mode, remember that the higher the level set, the more the noise level will be reduced, as will the brightness of the image. COLOR CCD CAMERA 22 User Guide COLOR CCD CAMERA 23 User Guide