Samsung SCO-2080R User Manual - Page 17

Troubleshooting If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. • Nothing appears on the screen. ▶ Check that the power cord and line connection between the camera and monitor are fixed properly. ▶ C heck that you have properly connected UTP cable or BNC cable to the camera. • The image on the screen is dim. ▶ Is lens stained with dirt? Clean your lens with soft, clean cloth. ▶ Set the monitor to proper condition. ▶ If the camera is exposed to too strong light, change the camera position. • The image on the screen is dark. ▶ Adjust the contrast feature of the monitor. ▶ If you have an intermediate device, set the 75Ω / Hi-z properly. • The camera is not working properly, and the surface of the camera is hot. ▶ Check that you have properly connected the camera to an appropriate power source. • The SENS-UP function does not work. ▶ Check that AGC of EXPOSURE SETUP menu is 'OFF'. ▶ Check that SHUTTER of EXPOSURE SETUP menu is 'A.FLK' or 'MANUAL'. • The Motion Detection function does not work. ▶ Check that MOTION DET of SPECIAL SETUP menu is 'OFF'. • Color is not correct. ▶ Check the setting of WHITE BAL SETUP menu. • The screen flickers continually. ▶ Check that direction of camera turns toward the Sun. • When coaxial communication is not available: ▶ M ake sure that the camera and monitor are installed within the recommended distance. ▶ U se the video amplifier equivalent to coaxitron if the recommended installation distance is exceeded. • IR-LED isn't lighted. ▶ Isn't DAYNIGHT function setting up the color mode? ▶ P lease change the AUTO or B/W mode. • The camera is not waterproof. ▶ Please check the Front Cover and Main Body by the following Guide Label. COLOR CCD CAMERA 32 User Guide Specifications ELECTRICAL Input Voltage Power Consumption VIDEO Imaging Device Total Pixels Effective Pixels Scanning System Synchronization Frequency Horizontal Resolution Min. Illumination Visibility distanse(IR LED) S/N (Y Signal) Video Output LENS Zoom Ratio Focus Length Angular Field of View OPERATIONAL Electronic Shutter Speed On Screen Display SSDR Backlight Compensation Day & Night Gain Control White Balance SENS-UP (frame Integration) Motion Detection Privacy Masking 3D Noise Filter (SSNRIII) Digital Zoom Digital Image Stabilization(DIS) Camera Title Sharpness Flip / Mirror Communication Protocol ENVIRONMENTAL Operating Temperature / Humidity MECHANICAL Water Resistance SCO-2080RN SCO-2080RP DC 12V ± 10% / AC 24V ± 10% Max 6.8W / 6.5W (IR-LED ON) 1/3 inch, Diagonal 6mm Super HAD CCD 811(H) x 508(V) 795(H) x 596(V) 768(H) x 494(V) 752(H) x 582(V) 2:1 Interlace Internal /Line-Lock H : 15.734KHz V:59.94Hz H: 15.625KHz V: 50.00Hz COLOR : 600TV line, B/W : 700TV line LED ON : 0Lux LED OFF : 0.15Lux (Color, F1.2), 0.0003Lux (Color,SENS-UP x512) 50m (32EA) 52dB (Weight On, AGC Off) CVBS : 1.0Vp-p, 75Ω composite 3.6x (Manual) 2.8 ~ 10.0mm (F1.2) H : 94.4°(Wide) ~ 28°(Tele) / V : 69.2°(Wide) ~ 21°(Tele) 1/60 ~ 1/120k sec 1/50 ~ 1/120k sec NTSC : 7 Languages, PAL : 15 Languages On / Off (Level adjustable) BLC / HLC / OFF COLOR / B/W / AUTO (ICR) Low / High / Off ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K) Auto / Off (Selectable x2 ~ x512) On / Off (8 Programmable zones) On / Off (12 Programmable zones) On / Off (Level adjustable) On / Off (x1 ~ x16) On / Off On / Off (Displayed 15 Characters) On / Off (Level adjustable) On / Off Coaxial, RS-485 Coaxial(Pelco), RS-485(SAMSUNG-T, SAMSUNG-E, PELCO-P, PELCO-D, VICON, PANASONIC, BOSCH, HONEYWELL) -10°C ~ +55°C / Less than 90% RH IP66 Dimension Weight Ø77mm(W) x 216mm(H) (BRACKET ANGLE 90°), 284mm (BRACKET ANGLE 180°) 1Kg ※ The specification for this product may change without prior notice for product improvement. COLOR CCD CAMERA 33 User Guide