Samsung SCO-2080R User Manual - Page 16

Operating Your Camera PRIVACY :Mask an area you want to hide on the screen. PRIVACY AREA SETUP 1.AREA 2.MODE 3.MASK COLOR 4.MASK TONE 5.TOP 6.BOTTOM 7.LEFT 8.RIGHT 9.RETURN AREA1 OFF GREEN 1 39 79 13 52 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates 'PRIVACY'. 2) Set up the mode using the Function Setup switch. - AREA :You can select up to 12 PRIVACY areas. - MODE : Determines whether to use the area selected in the AREA. - MASK COLOR :Determine area color.You can select Green, Red, Blue, Black,White, Gray. - MASK TONE :Adjust the brightness of MASK COLOR. - TOP/BOTTOM/LEFT/RIGHT :Adjust the size and position of the selected area. - RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu. DIS (Digital Image Stabilizer) : This function mitigates any picture movement due to external factors such as wind. Notes • A s the DIS function uses the digital zoom the camera's resolution will decrease. • D IS doesn't operate when background illumination is too low. • D IS doesn't operate when object pattern is monotonic as like sky or white wall. COLOR CCD CAMERA 30 User Guide C OMM ADJ (Communication Adjustment) : This function sets up the camera communication status when controlling the camera through an external control device.  1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates 'COMM ADJ'. 2) Set up the mode using the Function Setup witch. - CAM ID : Determines the camera's identification number (between 0 and 255). - BAUD RATE : You can select 2400/4800/9600/19200 /38400/57600 bps. - UART MODE : You can select NONE, EVEN or ODD for the parity bits. - RET PKT : D etermines whether to send a command back to the controller device when a communication control command is sent to the camera. - DISP ID : Display camera title on top left corner of the screen. - PROTOCOL :Y ou can select one of various protocols. SAMSUNG-T, SAMSUNG-E, PELCO-P, PELCO-D, VICON, PANASONIC, BOSCH, HONEYWELL. * Initial value of communication adjustment Item Camera ID BAUD RATE UART MODE Initial value 1 9600 8-NONE-1 PET PKT ENABLE LANGUAGE : You can select the menu language according to your requirements. RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu. EXIT Select a desired EXIT mode using the Function Setup Switch. - SAVE : Save the current settings and exit the MAIN SETUP menu. - NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu. - RESET : Resets the camera settings to the factory defaults. Language, Communication and Monitor Settings are not initialized. COLOR CCD CAMERA 31 User Guide