Samsung SCO-2080R User Manual - Page 8
Using Coaxial Communications, Connecting to RS-485 Control Cable, RS-485 communication control - techwin - co -
View all Samsung SCO-2080R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connection RS-485 communication control Connecting to RS-485 Control Cable CONTROL CABLE WHITE (TRX+) BLUE (TRX-) SPEC RS-485+ RS-485- WHITE (TRX+) BLUE (TRX-) Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG TECHWIN System Controller or DVR. (1) Connection to a PC. Connect the camera to the PC via a RS-485 converter using RS-485 and a serial cable. EX) SERIAL PORT OF THE PC(COM1) → SERIAL CABLE → RS-485 CONVERTER → RS-485 CONTROL CABLE (2) Connection to a DVR or System Controller. Connect the RS-485 cable to the connection ports of the DVR or System Controller. 485 Control Board Connection Port (+) CONNECTION TERMINAL (-) CONNECTION TERMINAL RS-485 Control Port WHITE (TRX+) BLUE (TRX-) * RS-485 Communication establishment initial value Item Camera ID BAUD RATE Initial value 1 9600 UART MODE 8-NONE-1 RET PKT ENABLE Notes • W hen making a control system to control the camera, please use to the protocol SAMSUNG-T, SAMSUNG-E, PELCO-P, PELCO-D, VICON, PANASONIC, BOSCH, HONEYELL). • W hen you connecting to RS-485 CONTROL TERMINAL, please peel off the outer skin inside the RS-485 CONTROL TERMINAL. • In case of SCC-101 connection, change communication mode to『8-E-1』at『Communication configuration』menu. (For more information, refer to SCC-101 manual.) COLOR CCD CAMERA 14 User Guide Using Coaxial Communications • C oaxial Communications System • OSD Control method CAMERA DVR SET MENU/ENTER UP UP KEY DOWN DOWN KEY LEFT LEFT KEY RIGHT RIGHT KEY CONTROLLER OSD KEY JOYSTICK UP JOYSTICK DOWN JOYSTICK LEFT JOYSTICK RIGHT DVR DVD • : BNC • ---- : RS-485 - Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp. Distance 300m 450m 600m Recommended Cable Specification 3C2V(RG-59/U) 5C2V(RG-6/U) 7C2V(RG-11/U) Notes • If the camera is controlled through coaxial communication, please use a video amp intended for coaxial communications. Regular video amps do not transfer coaxial signals. COLOR CCD CAMERA 15 User Guide