Samsung SEW-3035 User Manual - Page 10

Viewing Mode Display - out of range

Get Samsung SEW-3035 PDF manuals and user guides View all Samsung SEW-3035 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Viewing Mode Display Wireless Receiver SEW-3035 Signal Indicator The signal indicator shows the strength of the signal being received from the camera. The number of bars in the signal indicator shows the strength of the signal - One or no bars indicate the signal is poor, and 4 bars indicate a strong signal. Camera Number Indicates the number of camera that is displayed on the current screen. Press the [M] key on the receiver to switch between available cameras. n ` To automatically switch between channels, press the [A] key (AUTO). ` For paring to add a camera, refer to "Pairing". (Page 12) Temperature Shows the ambient temperature where the wireless camera is installed. Trigger Alert Indicates the type of alert when audio is detected on the camera. Talk Press and hold [ ]on the monitor to talk back to the camera currently being displayed on the LCD screen. Indicates that unit is on talking mode. 10 · Installation Night light Press [ ] in the wireless receiver to remotely turn on/off the night light on the wireless camera currently being displayed. An indicator light will be visible if on. Auto Mute If you set Auto Mute to , the applicable message appears on the screen. Micro SD card status Indicates when a Micro SD card is inserted. It indicates that micro SD card get full capacity when the icon is red,and card has some spaces when icon is white. It displays the recording type if you press REC [A] or REC [M] button. File List Indicates if recording file exists. To go to file list press [ ] button. A/M record Press to auto record or manual record during monitoring. Only available when the Micro SD card is inserted. REC [A] : Start recording when an alarm is detected. REC [M] : Start recording when the button is pressed. Volume adjustment The receiver volume can be adjusted by using the [+], [-] keys when viewing a camera. Press the [-] key to decrease the volume, and press the [+] key to increase the volume. When the volume bar is disappear, the volume will be muted and no sound will be emitted by the device. The volume adjustment icon will be displayed during volume changes, and will disappear after 5 seconds of inactivity. Alarm  Indicates if the alarm set to . Time/ZOOM Displays the time that is set in the current receiver. Displays zoom size if it sets x2. No Signal Warnings The "OUT OF RANGE" message means the receiver cannot access the camera. Please reposition the camera, or check the camera power. SEW-3035-ENGLISH.indd 10 2011-04-13 오후 5:37:31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
10
· Installation
Wireless±Receiver
Signal±Indicator±
The signal indicator shows the strength of the signal being received from the
camera. The number of bars in the signal indicator shows the strength of the
signal – One or no bars indicate the signal is poor, and 4 bars indicate a strong
signal.
Camera±Number±
Indicates the number of camera that is displayed on the current screen. Press
the [
M
] key on the receiver to switch between available cameras.
To automatically switch between channels, press the [
A
] key (AUTO).
For paring to add a camera, refer to “
Pairing
”. (Page 12)
n
`
`
Temperature
Shows the ambient temperature where the wireless camera is installed.
Trigger±Alert±
Indicates the type of alert when audio is detected on the camera.
Talk
Press and hold [
]on the monitor to talk back to the camera currently being
displayed on the LCD screen. Indicates that unit is on talking mode.
SEW-3035
Viewing Mode Display
Night±light
Press
[
] in the wireless receiver to remotely turn on/off the night light on the
wireless camera currently being displayed. An indicator light will be visible if on.
Auto±Mute±
If you set Auto Mute to <
YES
>, the applicable message appears on the screen.
Micro±SD±card±status±
Indicates when a Micro SD card is inserted.
It indicates that micro SD card get full capacity when the icon is red,and card
has some spaces when icon is white.
It displays the recording type if you press REC [
A
] or REC [
M
] button.
File±List±
Indicates if recording file exists.
To go to file list press
[
±
±
]
button.
A/M±record±
Press to auto record or manual record during monitoring.
Only available when the Micro SD card is inserted.
REC [
A
] : Start recording when an alarm is detected.
REC [
M
] : Start recording when the button is pressed.
Volume±adjustment±
The receiver volume can be adjusted by using the [
+
], [
–
] keys when viewing a
camera.
Press the [
–
] key to decrease the volume, and press the [
+
] key to increase the
volume. When the volume bar is disappear, the volume will be muted and no
sound will be emitted by the device.
The volume adjustment icon will be displayed during volume changes, and will
disappear after 5 seconds of inactivity.
Alarm±±
Indicates if the alarm set to <
ON
>.
Time/ZOOM
Displays the time that is set in the current receiver.
Displays zoom size if it sets x2.
No±Signal±Warnings
The "
OUT±OF±RANGE
" message means the receiver cannot access the camera.
Please reposition the camera, or check the camera power.
SEW-3035-ENGLISH.indd
10
2011-04-13
오후 5:37:31