Samsung SEW-3035 User Manual - Page 7
The IR indicator will be activated in a low contrast scene and cause an increase of the temperature - battery
View all Samsung SEW-3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
01 Getting Started Wireless Camera Front & Back Controls Camera Antenna Sends & receives signals to or from the receiver. Lens/IR LED Cover Infrared LED's provide viewing in no/low light conditions. Microphone Receives sounds for the area near the camera, and transmits sound from the camera to the receiver. Charging Indication LED LED is off when there is no rechargeable battery inside the camera base; the LED is red when the rechargeable battery pack is charging; the LED turns off when the rechargeable battery is fully charged. Night Light Switch Press to turn the night light ON or OFF. Alternatively, press the light button on the receiver to remotely turn the camera light ON or OFF. Temperature Sensor Sense the air temperature where the camera is placed. Pairing Button The pairing button is located on the back of the camera behind by the stand mount. DC 5V Power Input Connect the AC power adapter to the camera. n ` The camera can also be powered using 3 AA batteries (not included) installed in the base. If the camera is plugged in with the AC adapter, the batteries will not be used. The batteries are intended for short term, portable camera use. ` Remotely control Night Light ON or OFF is available only when the camera is paired to the receiver. ` The IR indicator will be activated in a low contrast scene and cause an increase of the temperature, which may affect the temperature sensor. SEW-3035-ENGLISH.indd 7 English · 2011-04-13 오후 5:37:30