Samsung SEW-3035 User Manual - Page 11

Menu Operation Menu Operation How to use the buttons to setup ► ► ► ► Enter menu setting Move to a menu Select the menu Adjust level Save the change 1. Press [MENU] button to enter the menu setting or exit the menu setting. 2. Move to other menu by press [A] or [M] key. 3. Press the [ ] button for option selection mode. 4. Adjust option level by [+] or [-] key. 5. Press the [ ] button to complete. Icons used in setup Brightness Adjusts the brightness of the image. Zoom Zoom in 1x or 2x of the video image. In double size mode, press the navigation control buttons to pan up/down and left/right while viewing live image. SEW-3035-ENGLISH.indd 11 Power Saving Enables receiver power save mode (when no activity on the camera is detected). The Power Saving Menu is used to turn off the screen at a predetermined time, to conserve battery power. After selected time, the monitor will go to a select screen saver or black screen if blank is selected as the screen saver. Power Saving mode will be deactivated by pushing [A], [M] or [SLEEP] on the front panel of monitor or by higher sound detected by cameras. If Power Saving mode is deactivated by pushing [A], [M] and [SLEEP], the monitor will go back to black screen after the time you set if there is no sound trigger during that time. Screen Saver After selected time, the monitor will go to a select screen saver or black screen if blank is selected as the screen saver. Auto Mute Automatically cuts off the audio when there is only slight environmental noise on the camera side. Choose to enable this function. If auto mute is enabled, the receiver will automatically mute if there is no audio detected from the camera. If the audio is detected on the camera, the receiver will automatically unmute. Alert Setting Select the type of alert when audio is detected on the camera. You may select the Vibration or Beep as the trigger alert manner while something has been detected by camera side. When choose vibration, all the buttons automatically in mute function. Temperature Unit Select the temperature unit ˚C or ˚F for you option to show in the screen. Temperature Alert Sets the temperature alert range. When temperature on camera side is out of the set range, the monitor will be alerted. English · 11 2011-04-13 오후 5:37:31 03 Menu Operation