Samsung SEW-3035 User Manual - Page 9

02 Installation Installation How to Install Caution if you use the system to watch a young child, do not place the camera where the child can reach. Wireless Receiver 1. Place the receiver in a place that will have clear reception with your camera(s). 2. Pull out the stand. n ` Do not pull up the stand lever with an excessive force. Otherwise, it may be broken. Wireless Camera Before you install the camera, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adapter. Before starting permanent installation, verify its performance by observing the image on the receiver when camera is positioned in the same location/position where it will be permanently installed and the receiver is placed in the location where it will be used most of the time. Installation Warnings Aim the camera(s) to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. Avoid installing the camera where there are thick walls or obstructions between the camera and the receiver. STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords within 3 feet of crib or playpen. Use enclosed wire clips to help secure cord away from child's reach. Never use extension cords with AC Adapters. Only use the AC Adaptors provided. 1. Carefully unpack the camera. If you are installing cameras that did not come with the system, please see the pairing camera section of this manual for details on installation. 2. Mount the camera to the wall. Mark the position of the screw holes on the wall, and drill holes and insert 2 screws, then firmly attach the camera to the wall by placing the stand over the installed screws and pushing the base downwards. n ` The camera can also be placed on a flat surface, such as a table or shelf, and no mounting hardware is required. 3. Adjust the viewing angle of the camera n ` You can install additional cameras (maximum of 4 cameras). When adding cameras that were not included in the original box, you will need to pair up the cameras with the receiver. For paring to add a camera, refer to "Pairing". (Page 12) How it works in viewing mode If you want to view the child's scene (on the camera display) on a larger screen such as TV or computer monitor, use the provided AV cable to connect the wireless receiver with the TV. n ` When using with a TV or computer monitor, the picture may appear to be grainy as the camera limits video resolution to VGA. This is not a product defect. For best performance, use with the TV/Monitor PIP (Picture in Picture) function. Check your TV/Monitor product manual to see if this feature is available on your TV/ Monitor. ` When connected to the TV or monitor, the receiver will show black screen. English ·  SEW-3035-ENGLISH.indd 9 2011-04-13 오후 5:37:30