Samsung SM-352N User Manual (user Manual) (ver.1.0) (English)
Samsung SM-352N Manual
View all Samsung SM-352N manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung SM-352N manual content summary:
- Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 1
Installing the CD Record Utility Installing the Device Driver Setting Up the Device Driver Using the Drive Using the COMBO Drive Storing and Cleaning Your Discs Upgrading the Firmware Flash Memory System Requirements Troubleshooting Solving Recording Problems Caution with errors Solving Technical - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 2
Safety Precautions Notational Warning / Caution Warning : This symbol indicates explanations about extremely dangerous matters. If users ignore this symbol and handle the device the wrong way, serious injury or death could result. Caution : This symbol indicates explanations about dangerous matters. - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 3
Safety Precautions Installation Place the drive on a level surface. - Failure to do so may cause the device to fall onto a hard surface, resulting in damage or malfunction. Do not place the drive in direct sunlight. Avoid low- or high-temperature environments. Avoid high-humidity environments. - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 4
Safety Precautions While Operating Handle with caution to prevent damage from external shock. Do not drop the drive, and protect it from severe shocks. - It can damage the drive or cause it to malfunction. Do not move the drive while in operation and do not attempt to open the disc tray byforce. - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 5
liquids as alcohol and benzene on the drive. Do not disassemble, attempt to repair or modify the device without express approval as directed in the manual. - To reduce the risk of damage, electric shock, and fire, - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 6
Introduction Front 1. Emergency eject hole. (If the compartment does not open when you press the Eject button, power off the computer, insert a pin or unfolded paper clip in the hole and push firmly) 2. Indicator Light. 3. Eject button. 4. Disc compartment. (The compartment opens and closes - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 7
Introduction Rear 1. Two-pin digital audio output terminal for use with a sound a MPEG card supporting digital audio features. 2. Four-pin sound output terminal for use with a sound card. (refer to the sound card documentation for further details) 3. Master/slave select - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 8
Setup Installing the COMBO Drive Installing the COMBO Drive Make sure that the PC is powered off and disconnected from any power source. If necessary, attach a horizontal bracket to both sides of the drive. Remove the cover from a free expansion slot and install the COMBO drive, as shown in the - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 9
on the rear of the Optical drive. A - Cut Side 1 +5V DC 2 Ground 3 Ground 4 +12V DC Note: An improperly connected power cable may cause trouble. Check the direction of the power connector and the incline side of the Optical drive before connecting. Connecting the E-IDE cable Insert the IDE cable - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 10
the Optical drive and the audio input terminal on the sound card. For clearer sound, use a digital output terminal.(Available only for the CAID that supports digital output) This may not be available for general sound cards. - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 11
any existing software of the same type before installing this utility. Insert the disc supplied with the COMBO drive in the drive. Follow the instructions displayed on the screen to install the utility. Refer to the separate utility documentation for further details. Store the utility disc in a safe - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 12
-click on the Control Panel folder. Double-click on the System icon. Click on the Device Manager tab. Expand the CD-ROM branch. The SAMSUNG COMBO SM - *** device name is displayed. The SAMSUNG device driver enables discs in the COMBO drive to be read but not recorded in an MS-DOS environment; the - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 13
Setting Up the Device Driver Setting Up the Device Driver Automatic Setup The device driver is located in the the computer. Manual Setup Make the C:\SAMSUNG directory. Copy the files from the diskette to the C:\SAMSUNG directory. To do so, type COPY D:\Ddriver * . * C:\SAMSUNG after the C:\prompt - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 14
by pressing the Eject button. The indicator light comes on. Play the disc (CD/DVD). Accessories z The type of accessories varies depending on product model. Audio cable. User Manual & Setup Guide. Software. Playing DVDs or Video CDs Set up and run the SOFT MPEG program supplied as an accessory - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 15
Using the Drive Storing and Cleaning Your Discs Storing and Cleaning Your Discs To ensure a long service life for your discs and drive, follow the pre-cautions below when storing and cleaning your discs. Do not place a disc in direct sunlight. Store a - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 16
Using the Drive Upgrading the Firmware Flash Memory Upgrading the Firmware Flash Memory The product firmware can be upgraded by downloading the updated file from the following Web site: Http://samsung.com Http://samsung-ODD.com - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 17
. The SM-352N COMBO drive supports RPCphase II. In the RPC-2 mode, the localcode can be changed by users. RPC-2is selected by default for the SM-352N COMBO drive. You can change the region code up tofive times via an MPEG application. Please contact your dealer or local SAMSUNG representative if - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 18
Troubleshooting Solving Recording Problems Hard Drive Network Drive CD-ROM Drive If you have any problems in recording via your COMBO drive, follow the appropriate instructions below for the source that you are is printed on. Ultra Speed : 16X, 24X, 32X High Speed-RW : supporting 10X General-RW - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 19
Troubleshooting Caution with errors Caution with errors Term Description Recommended Disc Types Caution with errors Every CD-RW or COMBO it waits at the address and then restarts recording after the buffer is full. You can avoid Buffer Under-Run problems by applying the above-mentioned principle. - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 20
Troubleshooting Caution with errors Recommended Disc Types CD-R MCC, PRO, TDK, FUJI, SKC, MAXELL, MPO, BEALL CD-RW RICOH, SONY, MITSUBISHI, NANYA General DMA Installation Guide Windows 98/Me Important! Please read the entire DMA installation guide before installing your COMBO drive. About DMA - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 21
Troubleshooting Solving Technical Problems Problem Meaning / Solution The COMBO drive is not detected by by MS-DOS. Reinstall the device driver or update it with the latest version by downloading it from the Samsung Web site. - Http://samsung.com - Http://samsung-ODD.com The COMBO drive is not - Samsung SM-352N | User Manual (user Manual) (ver.1.0) (English) - Page 22
Specifications SAMSUNG continually strives to improve its products. Both the design specifications and these user instructions are thus subject to change without notice. Technical Specifications ITEM CD-RW DVD/CD DISC Disc types supported in read mode DVD-ROM, DVD-RAM, DVD-VIDEO, DVD-R, DVD
Index
Main Page
Safety Precautions
Notational
Installation
While Operating
Other
Using the Drive
Using the COMBO Drive
Storing and Cleaning Your Discs
Upgrading the Firmware Flash Memory
System Requirements
Introduction
Front
Rear
Troubleshooting
Solving Recording Problems
Caution with errors
Solving Technical Problems
Setup
Installing the COMBO Drive
Connecting the Cables
Installing the CD Record Utility
Installing the Device Driver
Setting Up the Device Driver
Specifications