Samsung SR20H9051 User Manual - Page 22
Notes and cautions
![]() |
View all Samsung SR20H9051 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Notes and cautions Charging Note ffIf the battery overheats during charging, it may take longer to charge. ffWhen automatic charging is not working, do the following: -- Turn the emergency switch (on the bottom of POWERbot) off and on again. -- Unplug the docking station's power plug and then plug it back on. -- Unplug the docking station, and then check whether there is any foreign matter on the charge pins and clean POWERbot and the charge pins of the docking station with a dry cloth or rag. -- Check for any obstacles such as reflective objects, chairs, etc. near the docking station. ffIf POWERbot is left detached from the docking station, the battery will drain naturally. -- Try to keep POWERbot being charged on the docking station. (However, turn off the emergency switch and leave the docking station unplugged when planning to leave the house for long periods of time by going on a business trip or vacation, etc.) ffThe POWERbot cannot vacuum clumps of dirt, so some may remain on the floor after cleaning. -- Please use another cleaning tool to clean them regularly. ffIf POWERbot is turned off, you cannot turn it on by pressing the Power button on the remote control. Press and hold the [Start/ Stop] button on POWERbot. ffIf the battery becomes low during Auto/ Max clean mode, POWERbot will recharge and finish cleaning the remaining area after recharging. (Repeat cleaning frequency: 1 time) ffYou cannot select and have the POWERbot execute Max/Manual clean mode while it is charging. ffDo not unnecessarily move the POWERbot or press buttons while it is in Auto/Max clean mode. It assumes that cleaning is complete and starts cleaning again from the beginning. ffDo not lie down around the POWERBOT that is running. -- Your hair may be caught in the Pet brush or Side brush, resulting in physical injury. Using Note ffThe POWERbot may get caught on thresholds, etc. during cleaning. -- To restart operation, shut off the emergency switch, move the POWERbot to an area where it can move easily, and then turn on the power again. ffThe POWERbot cannot completely clean areas it cannot enter, such as corners, between the wall and sofa, etc. -- Please use another cleaning tool to clean them regularly. Cleaning and maintenance Note ffIf you washed the dustbin and filter with water -- Dustbin: Completely wipe out the water. -- Filter: Completely dry it in the shade before using. Caution ffWatch your fingers when attaching or detaching the filter, since they may get stuck in the dustbin's intake. ENGLISH-22
![](/manual_guide/products/samsung-sr2ah9051uw-user-manual-e6d723b/22.png)