Samsung SRD-450 User Manual - Page 29
Motion Sensor
View all Samsung SRD-450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
DVR SETUP MOTION SENSOR You can set the event recording so that the DVR can detect the event and specify the recording area. Using the mouse may help easy setup. 1. Use the direction buttons to move to in the left corner of the CAMERA setup menu and press the [ENTER] button. 2. Select a channel and specify the sensitivity of the motion detection. CAMERA CAMERA COLOR MOTION SENSOR SENSITIVITY CH 1 5 AREA SETUP CH 2 5 AREA SETUP CH 3 5 AREA SETUP CH 4 5 AREA SETUP 3. Press the button. The motion area setup screen appears. CANCEL APPLY CLOSE To select a motion area ˝ Move the cursor to display a white rectangle box. ˞ Move the box to the motion area and click the yellow box. ˟ The selected area will be marked in a white box. To deselect the motion area ˝ Move the cursor to the selected area. ˞ Click the yellow cell again. ˟ The yellow rectangle will disappear with the motion area deselected. To select / deselect all ˝ Right-click any area or press the [RETURN] button on the remote control. ˞ From the context menu that pops up, select a desired item. • SELECT ALL : Selects all areas. • DESELECT ALL : Deselects all areas. • CANCEL : Cancels your settings. • SAVE & EXIT : Saves your settings and exits the menu. SELECT ALL DESELECT ALL CANCEL SAVE&EXIT 4. When your settings are completed, press the button on the bottom. Your settings will be applied. 5. Press the button to display the confirmation dialog and return to the previous menu. English _29