Samsung STP-103PG User Manual - Page 26

GS v 0 xL xH yL yH dl...dk [Name] Print raster bit image [Format] ASCII GS v 0 m xL xH yL yH dl...dk Hex 1D 76 30 m xL xH yL yH dl...dk Decimal 29 118 48 m xL xH yL yH dl...dk [Range] 0 ≤ m ≤ 3 , 48 ≤ m ≤ 51 0≤ xL ≤ 255 , 0 ≤ xH ≤ 255 , 0 ≤ yL ≤ 255 0 ≤ d ≤ 255 k = (xL+xH×256) × (yL+yH×256) (k=0) [Description] Selects raster bit-image mode. The value of m selects the mode, as follows : m Mode Vertical dot density Horizontal dot density 0,48 Normal 200dpi 200dpi 1,49 Double-width 200dpi 100dpi 2,50 Double-height 100dpi 200dpi 3,51 Quadruple 100dpi 100dpi • xL, xH, selects the number of data bits(xL+xH×256)in the horizontal direction for the bit image. • yL, yH, selects the number of data bits (yL+yH×256)in the vertical direction for the bit image. GS w n [Name] [Format] [Range] [Description] Set bar code width ASCII GS w n Hex 1D 77 n Decimal 29 119 n 2 ≤n ≤6 Set the horizontal size of the bar code. n specifies the bar code width as follows: N Module width (mm) for Multi-level Bar Code Bi-level Bar Code Thin element width Thick element width (mm) (mm) 2 0.282 0.282 0.706 3 0.423 0.423 1.129 4 0.564 0.564 1.411 5 0.706 0.706 1.834 6 0.847 0.847 2.258 • Multi-level bar codes are as follows: UPC-A, UPC-E, JAN13, CODE93, CODE128 • Bi-level bar codes are as follows: CODE39, ITF, CODABAR [Default] n = 3 50 APPENDIX A : CONNECTORS Serial Interface Connector (STP-103S) PRINTER 20 TXD (O) 19 RXD (I) 21 CTS (I) 22~25 GND 18 RTS (O) FGND 25 PINE MALE CONNECT HOST 2 RXD (I) 3 TXD (O) 7 RTS (O) 5 GND 8 CTS (I) 4 DTR (O) 6 DSR (I) FGND 9 PINE FEMALE Parallel Interface Connector (STP-103P) PRINTER 1 /STROBE (I/O) 2 DATA0 (I/O) 3 DATA1 (I/O) 4 DATA2 (I/O) 5 DATA3 (I/O) 6 DATA4 (I/O) 7 DATA5 (I/O) 8 DATA6 (I/O) 9 DATA7 (I/O) 10 /ACK (I) 11 BUSY (I) 12 PE (I) 13 SLCT 15 /ERROR (I) 16~21 N.C 22~25 GND FGND 25 PINE MALE HOST 1 /STROBE (I/O) 2 DATA0 (I/O) 3 DATA1 (I/O) 4 DATA2 (I/O) 5 DATA3 (I/O) 6 DATA4 (I/O) 7 DATA5 (I/O) 8 DATA6 (I/O) 9 DATA7 (I/O) 10 /ACK (I) 11 BUSY (I) 12 PE (I) 13 SLCT 15 /ERROR (I) 16 /INIT (O) 18~25 GND FGND 25 PINE MALE 51