Samsung SW-208 User Manual (user Manual) (ver.1.0) (English) - Page 8

x Network Drive 1 Copy the network drive contents to the hard disk and then from the hard disk to the CD-R/RW drive. x CD-ROM Drive 1 Clean the source CD, if necessary. 2 Create an image file and then copy the image file to the CD-R/RW drive. 3 Check the CD-ROM drive record speed. There are two recording methods : q Low-speed (file by file) q High-speed (transfer of an image file from the hard disk) 4 If the transfer speed of the CD-ROM drive is slower than the record speed, reduce the record speed. x Others 1 Before starting to record, determine the audio and transfer speeds by using the [Tool/System Test] option in Easy CD Creator. Then, choose an appropriate record speed. If the audio speed is less than 2X, first create an image file on the hard disk. 2 To perform a record test before copying to a CD, select the [Test/Copy] option. 3 If the test fails, try recording on another disc. 4 The CD-R/RW drive does not support high-speed recording to CD-RW discs above 8X. Discs above CD-RW 8X use different rewriting methods and can only be read via the CD-R/RW drive. 5 When viewing CD-RW 2X properties or performing a full erase, the "WRITE SPEED 4X DISPLAY" error is displayed unexpectedly. The CD-R/RW drive has been operating continuously for 20 minutes after completing the full erase. Recommended Disc Types CD-R CD-RW Fujifilm, Kodak, Maxell, Mitsubishi, Mitsui, Pioneer, Ricoh, SKC, Sony, Taiyo Yuden, TDK, Yamaha Mitsubishi, Ricoh, SKC 12 13