Samsung SW-252B User Manual (user Manual) (English) - Page 18

Specifications SAMSUNG continually strives to improve its products. Both the design specifications and these user instructions are thus subject to change without notice. Technical Specifications ITEM SW-252B CD-RW DISC Disc types supported in read mode CD-DA(Audio), CD-ROM, CD-ROM XA, CD-Plus, CD-Extra, Photo-CD(Single, Multi-session), Video CD ready, Enhanced CD, CD-I/FMV, CD-R, CD-RW, CD-TEXT Erasing disc types CD-RW Disc diameter 120 mm or 80 mm DRIVE Data transfer rate Recording CD-R: PERFORMANCE 600 KB/sec. (4X), 1200 KB/sec. (8X), 1800 KB/sec. (12X), 2400 KB/sec. (16X), 3600 KB/sec. (24X), 4800 KB/sec. (32X), 6000 KB/sec. (40X), 7200 KB/sec. (48X), 7800 KB/sec. (52X) CD-RW : Ultra Speed Writing DISC: 3600 KB/sec. (24X) High Speed Writing DISC: 1500 KB/sec. (10X) Low Speed Writing DISC: 600 KB/sec. (4X) Reading CD-ROM: CD-R: CD-RW: PIO Mode 4:16.6MB/sec Multiword DMA mode 2 : 16.6MB/sec UDMA mode 2 : 33.3MB/sec CAV 52X CAV 40X CAV 40X Access time (Random) 110ms Data Buffer Bulk Type : 2MB Retail Pack : 8MB Laser Semiconductor laser Slide mechanism Stepping motor Spindle motor Load mechanism ERROR RATE FRONT PANEL Eject button Indicator Brushless motor Tray. DC motor (Soft Eject). Horizontal/Vertical. Mode 1: 1 block/10-12 , Mode 2: 1 block/10-9 Auto eject or Auto inject Play / Read (GREEN) Record (RED), Operation LED Headphone output Stereo mini-jack (Ø 3.6 mm) 0.65 ± 20% (vrms) 33 ohm Volume control Dial type REAR PANEL Required power +5 VDC: 1.5 A (Peak), +12 VDC: 1.5 A (Peak) Interface connector ATAPI BUS (E-IDE) Audio output Jumper block OPERATING Operations ENVIRONMENT Storage GENERAL Dimensions Net weight Line out 0.75V ± 20% (vrms) : 47Kohm Molex 70203 or other compatible models Temperature: 5~45°C Humidity: 10~80% Temperature: -25~60°C Humidity: 10~90% 148.2 (W) x 42 (H) x 184 (D) mm (including bezel) 780 g RELIABILITY MTBF 125,000 POH(Duty 20%) "Design and specifications are subject to change without prior notice."