Samsung TXJ2766 Service Manual - Page 19
White Balance Adjustment
View all Samsung TXJ2766 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3-3-11 White Balance Adjustment 3-3-11 (A) SCREEN ADJUSTMENTS 1. Input a TOSHIBA pattern. 2. Check R506 ÒGÓ pin on the CRT PCB with an oscilloscope. 3. Enter the Horizontal Line Mode. 4. Adjust the Screen Control on the FBT so that the waveform of the 21st line is DC 2.0 (±0.5)V. SIZE 29" 26" 22" DC 2.4 2.4 2.4 Alignment and Adjustments 3-3-11 (D) SUB-BRIGHTNESS ADJUSTMENT 1. Input a TOSHIBA pattern. 2. Set SBT so that the brightness level in low- light is 1.4 F/L. High-Light Low-Light 3-3-11 (B) HIGH-LIGHT ADJUSTMENT 1. NOTE : If a color analyzer is not available, then approximate the following color adjustments Òby eyeÓ. 2. Input a TOSHIBA pattern. 3. Set high-light to 290/300 (X,Y) with a color analyzer. 4. Set low-light to 1.4F/L. 5. Adjust RG, BG and set GG to step 32. HEIGHT LIGHT 30" 33 ± 5 29" 37 ± 5 26" 45 ± 5 22" 45 ± 5 3-3-11 (C) SUB-CONTRAST ADJUSTMENT 1. Set SCT so that the brightness level in highlight is 40 F/L (for a 29Ó SCREEN). 3-3-11 (E) SUB-COLOR ADJUSTMENT Set ÒSCRÓ in the Service Mode to step 0. 3-3-11 (F) SUB-TINT ADJUSTMENT Set ÒSTTÓ in the Service Mode to step 4. 3-3-11 (G) VERTICAL SIZE ADJUSTMENT 1. Input a lion head pattern. 2. Set VS to 32 in the Factory Mode. 3. Set VA so that the top margin is 4.0. Adjust SL so that the bottom margin is 4.0. If the top and bottom margins are different, adjust VA so that their sum is 8.0. 3-3-11 (H) HORIZONTAL SHIFT ADJUSTMENT 1. Input a lion head pattern. 2. Adjust ÒHSÓ in the Service Mode so that the left and right margins of the lion head pattern are 5.0 ± 0.5 : CT633BW/CT683BW, 6.3 ± 0.5 : CT566BV/CT566BW/CT568BW/CT765DW/ CT766DW/CT762B/CT25D4/CT29D4. Samsung Electronics 3-9