Samsung UN55F9000AF User Manual Ver.1.0 (English) - Page 175
Schedule Recording/Time Shift
![]() |
View all Samsung UN55F9000AF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
There is something wrong with the TV. Try this! There are small particles on the TV's bezel. This is part of the product's design and is not a defect. The PIP menu is not available. PIP functionality is only available when you are using an HDMI or Component source. A POP (TV's internal banner ad) appears on the screen. Change Use Mode (Support > Use Mode) to Home Use. The TV is making a popping noise. The expansion and contraction of the TV's outer casing may cause a popping noise. This does not indicate a product malfunction. The TV is safe to use. The TV is making a humming noise. This TV utilizes high-speed switching circuits and high levels of electrical current, and depending on the brightness level being used may seem slightly noisier than a conventional TV. This TV has undergone strict quality control procedures that meet our demanding performance and reliability requirements. Some noise coming from the TV is considered normal and is not an acceptable cause for an exchange or refund. Schedule Recording/Time Shift There is something wrong with the TV. The TV cannot recognize the USB device or failing Device Format, Check Device, and Device Performance Test. Try this! Refer to the USB device's manual and see if data can be stored on it. Check if the USB device is in a locked state. Check if the USB device was formatted when it was connected to a computer. Formatting a USB device after connecting it to the TV may result in a formatting failure. If Device Performance Test or Device Format has failed, there may be a problem with the USB device or its specifications. Try using a different USB device. There is a message saying I need to format the USB storage device. Check if the USB device is in a locked state. Use the USB recovery function to recover the USB device. Schedule Recording cannot be used. Check if there is a USB device connected to the TV. Check if the channel is a digital channel that can be recorded. Recording will automatically stop if the signal becomes too weak. The Time Shift function will not work if there isn't enough storage space on the USB device. I get a performance test failure message and then Schedule Recording and the Time Shift operation stops working. This problem can occur when using a low-performance USB storage device that does not support recording. A USB hard drive with a speed of 5,400rpm or above is recommended. However, RAID-type USB hard drives are not supported.
![](/manual_guide/products/samsung-un55f9000af-user-manual-ver10-english-90c6cdc/175.png)