Samsung UN55F9000AF User Manual Ver.1.0 (English) - Page 48
Connecting to the TV, Battery Low Alarm
![]() |
View all Samsung UN55F9000AF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Connecting to the TV In order to operate the TV using a Smart Touch Control, you must first pair it to the TV via Bluetooth. However, the Smart Touch Control is only available for the paired Samsung TV. 111 Point the Smart Touch Control toward the IR sensor of the TV, and press TV button on the Smart Touch Control. The remote control receiver's location may vary depending on the model. 222 A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect to the Smart Touch Control automatically. Reconnecting the Smart Touch Control If the Smart Touch Control stops operating or works abnormally, replace the battery as this may be caused by insufficient battery power. If the problem persists, press the PAIRING button on the Smart Touch Control to restore pairing with the TV. The PAIRING button cannot be accessed without removing the Smart Touch Control's battery cover. Within a distance between 1ft to 13.1ft (30cm to 4m), point the Smart Touch Control to the TV receiver and press the PAIRING button. When pairing is complete, the pairing image displays at the bottom left of the TV screen.
![](/manual_guide/products/samsung-un55f9000af-user-manual-ver10-english-90c6cdc/48.png)