Samsung WF431ABP/XAA User Manual (user Manual) (ver.1.0) (English) - Page 23

Cleaning The Debris Filter - 04

Get Samsung WF431ABP/XAA PDF manuals and user guides
UPC - 036725569195
View all Samsung WF431ABP/XAA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

04 maintaining your washer CLEANING THE DEBRIS FILTER We recommend cleaning the debris filter when water does not drain well or the "ND" error message is displayed. 1. Open the filter cover by pressing and pulling the handle of the filter cover with your finger. 2. Unscrew the drain cap by turning it counterclockwise. 3. Hold the cap on the end of the drain tube and slowly pull it out about 6 inches (15 cm), and then drain off all the water. Step 1 Step 2 4. Remove the debris filter cap. 5. Wash any dirt or other material from the debris filter. Make sure the drain pump propeller behind the debris filter is not blocked. 6. Replace the debris filter cap. 7. Replace the filter cover. WF431ABP-03016A_EN.indd Sec4:23 maintaining your washer _23 2011-01-11 ¿ÀÈÄ 3:18:02

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
maintaining your washer
_23
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the “ND” error message is displayed.
1.
Open the filter cover by pressing and pulling the handle of the
filter cover with your finger.
2.
Unscrew the drain cap by turning it
counterclockwise.
3.
Hold the cap on the end of the drain tube and
slowly pull it out about 6 inches (15 cm), and
then drain off all the water.
4.
Remove the debris filter cap.
5.
Wash any dirt or other material from the
debris filter. Make sure the drain pump
propeller behind the debris filter is not
blocked.
6.
Replace the debris filter cap.
7.
Replace the filter cover.
04 maintaining your washer
Step 1
Step 2
WF431ABP-03016A_EN.indd Sec4:23
WF431ABP-03016A_EN.indd
Sec4:23
2011-01-11 ¿ÀÈÄ 3:18:02
2011-01-11
¿ÀÈÄ 3:18:02