Samsung WF457ARGSGR/A2 User Manual Ver.1.0 (English, French, Spanish) - Page 36
Using the Delay Start function
View all Samsung WF457ARGSGR/A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Washing a load of laundry 7. The My Cycle "None1" is changed to "J's Wash" in the My Cycle list on the Cycle Selection screen. Starting a My Cycle Follow the steps below to start a My Cycle to wash your laundry. 1. Tap the My Cycle button in the Cycle Selection screen. It will expand and show a list of 3 My Cycle buttons. 2. Tap a My Cycle button. 3. Press the Start/Pause button to start your wash. Using the Delay Start function By activating the Delay Start function, you can set your washer to start your wash automatically at a specified later time. Activating Follow the steps below to activate the Delay Start function. 1. Tap the Delay Start OFF ( ) button located at the bottom right of the Cycle Selection screen. The Delay Start screen is displayed. 2. Tap the up / down arrows to set a time. 3. If the Smart Grid function is available, you can allow your washer to find the most energy efficient time (called the most eco-friendly time) to run your wash within a range of the time you set. 4. Tap the OK button to activate the Delay Start function with the options you set. Tap the Cancel button to cancel the function. 5. You are returned to the Cycle Selection screen. You will see that the Delay Start OFF ( ) button has been changed to the Delay Start ON ( ) button. Deactivating Follow the steps below to deactivate the Delay Start function. 1. Tap the Delay Start ON ( ) button located at the bottom right of the Cycle Selection screen. The Delay Start function is deactivated and the button changes to the Delay Start OFF ( ) button. 36_ Washing a load of laundry WF457ARG-03153A-04_EN.indd 36 2012-08-31 12:30:26