Samsung WF457ARGSGR/A2 User Manual Ver.1.0 (English, French, Spanish) - Page 56

Maintaining your washer CLEANING THE DEBRIS FILTER We recommend cleaning the debris filter when water does not drain well or the "nd" error message is displayed. 1. Open the filter cover by pressing and then pulling the handle of the filter cover with your finger. Filter cover 2. Holding the drain cap, pull the drain tube that is hooked onto the guide hook to the front. Do not pull the drain tube with excessive force. 3. Place a bowl under the washer to catch any remaining water. Then, hold the drain tube with one hand, and turn the emergency drain cap counter clockwise with the other hand to separate it from the drain tube. 4. Drain the remaining water completely. Step 1 5. Turn the debris cap counterclockwise, and then pull the debris cap and debris filter assembly out of the washer. Drain cap Step 2 Debris filter cap 6. Wash any dirt or other material from the debris filter. 7. Make sure the drain pump propeller behind the debris filter is not blocked. 56_ Maintaining your washer WF457ARG-03153A-04_EN.indd 56 2012-08-31 12:30:34