Samsung WS-32Z308T User Manual (user Manual) (ver.1.0) (English) - Page 9

Plug & Play Feature(depending on the model), Start Plug & Play, Language, Check antenna input.

Page 9 highlights

Plug & Play Feature (depending on the model) When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock. 1 If the television is in Standby mode, press the POWER button on the remote control. The message Start Plug & Play is displayed. 2 The Language menu will automatically appear after several seconds. 3 Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER ( ) button to enter the language. The message Check antenna input. is displayed. ➢ If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later. 4 Make sure that the antenna is connected to the TV. Press the ENTER ( ) button. The Auto Store menu is displayed. 5 Select your country by pressing the ▲ or ▼ button, then press the ENTER ( ) button. The Search menu is displayed. 6 Press the ENTER ( ) button to start search the channels. The channel search will start and end automatically. After all the available channels are stored, the Clock Set menu appears. ➢ Refer to "Storing Channels Automatically" on page 11. 7 Press the ◄ or ► button to move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button. ➢ ◆ Refer to "Setting and Displaying the Current Time" on page 24. ◆ You can set the hour and minute directly by pressing the numeric buttons on the remote control. 8 When you have finished, press the MENU ( ) button. The message Enjoy your viewing is displayed, and then the channel which has been stored will be activated. If you want to reset this feature... 1 Press the MENU ( ) button to display the menu. 2 Press the ▲ or ▼ button to select Setup, and then press the ENTER ( ) button. The Plug & Play is selected. 3 Press the ENTER ( ) button again. This feature starts with the message Start Plug & Play displayed. Plug & Play Start Plug & Play OK Enter Return TV Setup Plug & Play English Deutsch Language : EnNgeFldriearnslçhaanidss Time Español Italiano Blue Screen : SOvnenska Português Melody :ΕOλnληνικά Ceština Srpski Move Enter Skip Plug & Play Check antenna input. OK Enter Skip TV Country Search Auto Store : BelBgFeirlaugnmicuem Germany Italy Netherlands Spain Sweden Switzerland United Kingdom Others Eastern Europe Move Enter Skip Search P 1 C 87 MHz 10% Enter Stop Skip TV Clock Set Hour Minute -- -- Move Adjust Skip Plug & Play Enjoy your viewing OK English - 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

English - 9
Plug & Play Feature
(depending on the model)
When the television is initially powered on, three basic customer settings proceed
automatically and subsequently: setting the language, channel and clock.
1
If the television is in Standby mode, press the
POWER
button on the
remote control.
The message
Start Plug & Play
is displayed.
2
The
Language
menu will automatically appear after several seconds.
3
Select the appropriate language by pressing the
or
button.
Press the
ENTER
(
) button to enter the language.
The message
Check antenna input.
is displayed.
If any language is not selected on the
Language
menu, the
Language
menu will disappear about 30 seconds later.
4
Make sure that the antenna is connected to the TV.
Press the
ENTER
(
) button.
The
Auto Store
menu is displayed.
5
Select your country by pressing the
or
button, then press the
ENTER
(
) button.
The
Search
menu is displayed.
6
Press the
ENTER
(
) button to start search the channels.
The channel search will start and end automatically. After all the available
channels are stored, the
Clock Set
menu appears.
Refer to “Storing Channels Automatically” on page 11.
7
Press the
or
button to move to the hour or minute.
Set the hour or minute by pressing the
or
button.
Refer to “Setting and Displaying the Current Time” on page 24.
You can set the hour and minute directly by pressing the numeric
buttons on the remote control.
8
When you have finished, press the
MENU
(
) button.
The message
Enjoy your viewing
is displayed, and then the channel
which has been stored will be activated.
If you want to reset this feature...
1
Press the
MENU
(
) button to display the menu.
2
Press the
or
button to select
Setup
, and then press the
ENTER
(
) button.
The
Plug & Play
is selected.
3
Press the
ENTER
(
) button again.
This feature starts with the message
Start Plug & Play
displayed.
Plug & Play
Enter
Return
Start Plug & Play
OK
Setup
Plug & Play
Language
: English
Time
Blue Screen
: On
Melody
: On
Move
Enter
Skip
TV
English
Deutsch
Français
Nederlands
Español
Italiano
Svenska
Português
Ελληνικά
Ceština
Srpski
Plug & Play
Enter
Skip
Check antenna input.
OK
Stop
Search
Enter
Skip
P 1 C−− −−−−−
87
MHz
10%
Move
Adjust
Skip
TV
Clock Set
Hour
Minute
--
--
Plug & Play
Enjoy your viewing
OK
Auto Store
Country
: Belgium
Search
Move
Enter
Skip
TV
Belgium
France
Germany
Italy
Netherlands
Spain
Sweden
Switzerland
United Kingdom
Others
Eastern Europe