SanDisk C240 User Guide - Page 6

INSTALL OR REPLACE BATTERY The Sansa c200 is powered by a rechargeable lithium ion battery. To install or replace battery, locate the battery compartment on the back of the player, press in on the tab of the battery compartment cover to remove it. Orient and insert the battery according to the battery icon with pins inside the battery compartment for proper installation. HOLD SWITCH The Sansa c200 Hold Switch is located on the side of the device, and is used to prevent any accidental operation. Once the Hold Switch is moved to the lock position, all function keys will be disabled. Buttons on the Sansa c200 will not operate when the Hold Switch is active (Orange Color visible). REC BUTTON The Sansa c200 Record button is located on the front side panel of the device and is used to launch the mic recording feature. Press button down for 2 seconds and release to start recording. Then press the middle silver button to stop recording. MINIMUM SYSTEM REQUIREMENTS Windows XP SP1 Windows Media Player 10 Intel Pentium class PC or higher CD-ROM drive USB 2.0 port required for hi-speed transfer CONNECTING AND TRANSFERRING Connect to your Computer 1. Connect the small USB Cable Connector to the USB port on your computer, and then plug the larger Cable Dock Connector in to your Sansa c200 port. 2. Once connected to computer, it should be detected by the operating system automatically and is shown as an additional drive called "Sansa c200". SANSA MEDIA CONVERTER You will need to use Sansa Media Converter to transfer photos to your Sansa c200. Insert your SanDisk CD and select Sansa Media Converter to install it to your PC. Then you can load your personal photos onto your Sansa c200 by using Sansa Media Converter. Supported IMPORT Media Types Still Image Files: JPEG, TIFF, PNG, BMP, GIF. TRANSFER PHOTOS To transfer photos to your Sansa c200: 1. Open Sansa Media Converter on your PC 2. Connect Sansa c200 to the computer. The detected Sansa c200 will list the available space and total space on the device. If more than one device is inserted, only the first device will be supported.