Sanyo ABC-VW24A ABC-VW24A Owners Manual English & French - Page 14

Electrolyzed Water Unit/Tank

Page 14 highlights

Cleaning Methods Warning Always remove the power plug from the wall outlet. Electrolyzed Water Unit/Tank 1 Remove the cover, tank, and electrolyzed water unit. 2 ¡Lift the tank straight up. Cover Tank Electrolyzed Water Unit Remove the electrolyzed water cover. ¡Remove the cover from both sides (lift to remove the electrolyzed water cover). Hook Lift Electrolyzed Water Cover Note: [Rear] Hook ¡Use a towel to ensure that the floor does not get wet from water attached to the electrolyzed water unit and tank. 3 Wash the tank and electrolyzed water cover with water. ¡Rinse clean with water. Use a toothbrush to remove the dirt if extremely dirty. 4 In the event of limescale build up on the Sterile-Electrolytic Mist Generator, clean with white vinegar to remove the limescale. Do not use water as this may cause the unit to malfunction. Cotton Swab Sterile-Electrolytic Mist Generator 5 6 Wipe off any water and dry completely. Re-assemble the electrolyzed water unit and replace. ¡Place the side tabs of the electrolyzed water unit cover to the bottom and press the hooks on both sides. Tab Hook 7 8 Close the cap on the tank and replace. Cap Replace the cover. ¡Push from above. Hooks Cover Note: ¡Do not wash any other components except the tank and electrolyzed water unit. This may cause an electric shock or malfunction. ¡Do not use detergents. This may cause malfunctions. E-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

E-13
Hook
Lift
Cotton
Swab
Tab
Hooks
Hook
Cap
Cover
Hook
Electrolyzed
Water Cover
Sterile-Electrolytic
Mist Generator
Tank
Electrolyzed Water Unit
Cover
[Rear]
Cleaning Methods
Electrolyzed Water Unit/Tank
Always remove the power plug from the wall outlet.
Warning
Note:
¡
Do not wash any other components except the tank and electrolyzed water unit. This may
cause an electric shock or malfunction.
¡
Do not use detergents. This may cause malfunctions.
Note:
¡
Use a towel to ensure that the floor does not get wet from water attached to the electrolyzed
water unit and tank.
1
2
5
6
3
4
7
8
Remove the cover, tank, and
electrolyzed water unit.
¡
Lift the tank straight up.
Remove the electrolyzed water cover.
¡
Remove the cover from both sides (lift to
remove the electrolyzed water cover).
Wash the tank and electrolyzed water
cover with water.
¡
Rinse clean with water. Use a toothbrush to
remove the dirt if extremely dirty.
In the event of limescale build up on
the Sterile-Electrolytic Mist Generator,
clean with white vinegar to remove the
limescale. Do not use water as this
may cause the unit to malfunction.
Wipe off any water and dry completely.
Re-assemble the electrolyzed water
unit and replace.
¡
Place the side tabs of the electrolyzed water
unit cover to the bottom and press the hooks
on both sides.
Close the cap on the tank and replace.
Replace the cover.
¡
Push from above.