Sanyo ABC-VW24A ABC-VW24A Owners Manual English & French - Page 6

Preparations Before Use Installing the Filter 1 Remove the front cover ¡q Press the Release buttons (both sides) at the bottom of the unit, w pull the front cover away from the unit, and e lift. e 2 Remove the pre-filter (filter). ¡Hold the tabs of the pre-filter and pull to remove. Pre-filter Filter Supports Front Cover Press q Release Button Tabs q Press w 3 Remove the pre-filter from the filter and remove from the plastic protector. ¡Widen the frame of the pre-filter and remove the filter. Plastic Protector FRONT 4 Attach the filter to the pre-filter. ¡Insert the side printed with the word "FRONT" into the side of the net. Net Filter Pre-filter Filter Pre-filter 5 Attach the pre-filter. ¡Ensure that the tabs of the pre-filter are to the front. q Insert the filter under the filter supports at the top and then w push the filter in at the bottom. Filter Supports 6 Attach the front cover. ¡q Place the tabs (3) at the top of the front cover into the attachment slots. ¡w Press the bottom until the cover clicks. Attachment Slots q Tabs Tabs Front Cover Tabs w Note: ¡Always be sure to install the pre-filter, filter and front cover before operating the unit. ¡If the plastic protector is not removed from the filter, the device will not clean the air. In addition, this may cause a malfunction. ¡Write the date of the filter installation on the date label as a guide for the filter replacement and attach the label to the unit. E-5