Sanyo ABC-VW24A ABC-VW24A Owners Manual English & French - Page 7

Warning Do not place flammable material in the tank. This may cause a fire. Replenishing the Water 1 Lift the tab on the cover and remove. 2 Remove the tank. ¡Lift the tank straight up. Tank Cover Tab Note: ¡Water attached to the cap may drip when removing the tank. Use a towel to ensure that the floor does not get wet. 3 Loosen the cap to the tank and fill the tank with tap water. ¡Fill the tank with tap water without overfilling. As a guide, a full tank of water will last for a maximum of about 2 to 3 weeks of operation. (For automatic operation) The length of time before the tank needs to be refilled will vary depending on the usage conditions. 4 Tighten the cap of the tank. ¡Confirm that the cap is on securely. Cap Cap English Note: Tank ¡Wash the cap well as mold may form on the tank cap. 5 Replace the tank. ¡Line up the tank. Tank 6 Replace the cover. ¡Press the cover into place matching the configuration. Cover Water Use water specified in the attached (Notes). This may hinder proper operation. Note: ¡Only use tap water below 86°F. ¡Mold and bacteria may develop if unspecified water is used and may hinder proper operation. ¡Dispose the water in the electrolyzed water unit and tank after removing the power plug. Without electricity, the effect of the electrolyzed water is reduced and mold and bacteria may develop. ¡Dispose of the water in the tank if the water has a chance of freezing. If the water freezes, it may cause the device to malfunction. ¡If the temperature of the water is low (10°C or below), the sterile electrolytic mist may not be emitted. ¡When filling the tank with water, let the water run freely for about 3 to 5 seconds before filling the tank, otherwise the quality of the water remaining in the faucet will deteriorate. E-6