Sanyo CE42LM4WPN-NA Owner's Manual for POA-LN01 - Page 18
Windows XP
UPC - 086483065156
View all Sanyo CE42LM4WPN-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Windows XP Configure the network of computer This example explains how to set the following network address. IP Address : 192.168.0.5 Subnet Mask : 255.255.255.0 Gateway Address : 192.168.0.1 1 Select the Control Panel menu from the [Start] menu. Click the Network and Internet Connection and then click the Network on the control panel. 2 Click the Local Area Connection icon with right button of the mouse and then select the Property menu. The right window will appear on the screen. 3 Select the General tab on the "Local Area Connection Properties" dialog window. Select the Internet Protocol(TCP/IP)*1 and then press the Properties button. 4 On the "Internet Protocol (TCP/IP) Properties" dia- log window, select the Use the following IP address button and then enter the IP address*2 and Subnet mask. 5 Enter the Default gateway address. ✐ This setting is not needed if the network does not provide the gateway (router). 6 Click the OK button, the setting window will be closed. *1 Select the "TCP/IP" item of the LAN card you use. If the "TCP/IP" item is not listed in the column, you need to install the TCP/IP protocol. For further information refer to the user's manual of your computer. *2 If the network already has the TCP/IP protocol set, enter with the same IP network number for the IP address and Subnet mask. *3 There are some ways to set up the network depending on your computer's appearances. 18