Sanyo ICR-B50 Owners Manual - Page 6
Before Operation
View all Sanyo ICR-B50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
BEFORE OPERATION Earphone Connect an earphone (8 ohms, cord length less than 2 meters (6 feet, 6 inches), not supplied) to the EAR jack. (The speaker is automatically disconnected.) Note: Be sure to reduce the volume before connecting or disconnecting the earphone. External microphone Connect an external microphone (not supplied) to the MIC jack. (The builtin microphone is automatically disconnected.) Turning the power on and off Press the n button to turn on the power. The display appears as shown right. The unit is now in standby mode. To turn off the power, press the n button for at least 1 second in the stop mode. Auto power off function Fig. 4 The power turns off automatically when 5 minutes have elapsed after enter- ing the stop, playback pause or recording pause mode. Hold function The HOLD switch (back of the unit) disables the buttons (m, n, a, c or d) from operating, to prevent playback or recording due to accidental operation. Set the HOLD switch to ON. "HOLD ON" appears briefly on the display. For normal use, set the switch to OFF. "HOLD OFF" appears briefly on the display. 5