Sanyo PDG-DWL100 Owner's Manual - Page 57
Serial Control Interface, Operation
UPC - 086483074875
View all Sanyo PDG-DWL100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Appendices Serial Control Interface This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port. Operation 1. Connect a RS-232C serial cross cable to SERVICE PORT on the projector and serial port on the PC. 2. Launch a communication software provided with PC and setup the communication condition as follows: 3. Type the command for controlling the projector and then enter the "Enter" key. Example When you want to change the input to Computer 2, Type 'C' '0' '6' 'Enter'. Baud rate Parity check: Stop bit Flow control Data bit : 9600 bps : none : 1 : none : 8 Note • T he default of the baud rate is set to 9600 bps. • Enter with ASCII 64-byte capital characters and one-byte characters. 56 English