Sanyo PDG-DWL100 Owner's Manual - Page 59
Status Read Command
UPC - 086483074875
View all Sanyo PDG-DWL100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Appendices Note Status Read Command Format The command is sent from PC to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command table below. ■ The projector decodes the command and returns the 'Character string' with the format below; The tables on pages 56~58 show the typical command lists for controlling the projector. Please consult your local dealer for further information of other commands. Command CR0 Function Status Read Note CR1 During the standby CR3 mode status, the projec- CR4 tor responds to "Power On" through RS232/ CR6 PJLink/Telnet com- mands. CR7 Input Mode Read Lamp Time Read Setting Read Temperature Read Lamp Mode Read Projector Return 00 20 10 28 21 Projector status Power ON Cooling Down Power Failure Cooling Down due to Abnormal Temperature in process Cooling Down in process after Off due to lamp failure S1 = Temperature at Sensor 1 (˚C) S1 (ex.) S1 = 12.3˚C --> The projector displays "12.3 Note In Standby mode, the projector will not respond [S1] when sending CR6 command by RS232/Telnet. 58 English