Sanyo PLC-XF47 Owners Manual - Page 29
NO SHOW button, KEYSTONE button, P-TIMER button, IMAGE ADJ° button, P-TIMER, button, NO SHOW
UPC - 086483068959
View all Sanyo PLC-XF47 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Basic Operation NO SHOW button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. Remote Control NO SHOW button "No show" disappears after 4 seconds. IMAGE ADJ. button IMAGE ADJ. button Press the IMAGE ADJ. button on the remote control to adjust a image level of the screen. For more detail, see pp.44-46. P-TIMER button KEYSTONE button IMAGE SEL. button IMAGE SEL. button Press the IMAGE SEL. button on the remote control to select a desired image level of the screen. For more detail, see pp.37, 41. ✔Note: • See the previous page for the description of other buttons. P-TIMER button Press the P-TIMER button on the remote control. The Timer display "00 : 00" appears on the screen and starts to count time (00 : 00-59 : 59). To stop the P-TIMER, press the P-TIMER button. To cancel the P-TIMER, press the P-TIMER button again. P-Timer display KEYSTONE button Press the KEYSTONE button on the remote control. The "Keystone" appears on the screen. Use the Point ed7 8 buttons to correct keystone distortion. The keystone adjustment can be stored (pp.39, 43). • The white arrows indicate that there is no correction. • A red arrow indicates the direction of correction. • An arrow disappears at the maximum correction. • If you press the KEYSTONE button on the remote control again while the Keystone dialog box is being displayed, the keystone adjustment will be canceled. • "Keystone" disappears after 10 seconds. Reduce the upper width with Point e button. Reduce the lower width with Point d button. Reduce the left part with Point 7 button. Reduce the right part with Point 8 button. 29