Sanyo PLC-XF47 Owners Manual - Page 58
Resetting the Lamp Counter, ORDER REPLACEMENT LAMP, Model No° of your projector, PLC-XF47/PLC-XF47K - plc projector
UPC - 086483068959
View all Sanyo PLC-XF47 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Maintenance and Care Resetting the Lamp Counter Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP REPLACE indicator stops lighting and the Lamp replacement icon disappears. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon 2 Use the Point ed buttons to move the red frame pointer to Lamp counter and then press the SELECT button. A dialog box appears. Select a lamp and the "Lamp replacement counter Reset?" appears. Select [Yes] to continue. 3 Another confirmation dialog box appears and select [Yes] to reset the Lamp counter. ✔Note: • Do not reset the Lamp counter without replacing the lamp. Be sure to reset the Lamp counter only after replacing the lamp. Lamp counter Select a lamp and the "Lamp replacement counter Reset?" appears. Select [Yes], then another confirmation box appears. Select [Yes] again to reset the lamp counter. ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. ● Model No. of your projector : PLC-XF47/PLC-XF47K ● Replacement Lamp Type No. : POA-LMP109 (Service Parts No. 610 334 6267) 58