Sanyo PLC-XL51 Owner's Manual - Page 37
Video Input, Input Source Selection (Video, S-Video, Component)
UPC - 086483072222
View all Sanyo PLC-XL51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Video Input Input Source Selection (Video, S-Video, Component) Direct Operation Press the INPUT button on the top control to select Video, or press the VIDEO button on the remote control to select Video, the S-VIDEO button on the remote control to select S-video, or the COMPONENT button on the remote control to select Component. Before using the INPUT or VIDEO / S-VIDEO / COMPONENT buttons, select the correct input source through menu operation as described below. Top Control INPUT button INPUT button Computer 1 Computer 2* Video Menu Operation 1 Use the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Input Menu icon. 2 Use the Point ed buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu . 3 Move the pointer to the desired source and then press the SELECT button. Auto When selecting "Auto," the projector automatically detects the incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1. Component 2. S-video 3. Video Remote Control VIDEO button Wired Wireless S-VIDEO button COMPONENT button Input Menu icon Input Menu Move the pointer to Video and press the SELECT button. Video When the video input signal is connected to the VIDEO jack, select Video. S-video When the video input signal is connected to the S-VIDEO jack, select S-video. Component When the input source is coming from video equipment connected to the COMPONENT IN terminal with a Component Cable (not supplied), select Component. VIDEO Source Select Menu (VIDEO) Move the pointer to the desired source and press the SELECT button. ✔Note: •Computer 2 is not displayed when the COMPUTER IN 2/ MONITOR OUT terminal is set as Monitor out (p.49). • Wired and Wireless are for the Network function. See owner's manual "Network Set-up and Operation" . 37