Sanyo PLC-XR70N Installation - Page 1

Sanyo PLC-XR70N - 70" Rear Projection TV Manual

Page 1 highlights

Rear Projection Display Installation Manual REQUEST A SALES DEALER FOR INSTALLATION Please read all instructions below and install this system properly. Please read "SAFETY PRECAUTIONS" and "IMPORTANT SAFETY INSTRUCTIONS" on OWNER'S MANUAL to install and place this system. This system is supplied in 3 packages and they need to be installed. Please make sure all the parts are included. If any part is missing, or if you have questions, contact a sales dealer. Install the system following steps. 1. CHECK CONTENTS IN PACKAGES 2. ASSEMBLE BOTTOM CABINET 3. JOINT TOP AND BOTTOM CABINETS 4. SETUP PROJECTION MIRROR 5. ADJUST PROJECTION MIRROR 6. ASSEMBLE STORAGE SPACES 7. LOCK CABINET THIS SYSTEM MUST BE INSTALLED BY 2 OR MORE PEOPLE CAUTION WHEN INSTALLING THIS SYSTEM, BE CAREFUL NOT TO DAMAGE THE PROJECTION SCREEN. AND NEVER TOUCH THE SURFACE OF THE PROJECTION SCREEN AND THE PROJECTION MIRROR DIRECTLY. THEY MAY EFFECT THE PROJECTION IMAGE QUALITY. BE CAREFUL NOT TO DROP ANY PART OR TOOL LIKE SCREW INTO THE SYSTEM. IF IT SHOULD, CONTACT A SERVICE. EXCEPT WHEN ADJUSTING THE PROJECTION MIRROR, NEVER TURN THE SYSTEM ON UNTIL THE INSTALLATION IS FINISHED. IT MAY CAUSE ELECTRICAL SHOCK OR FIRE HAZARD. 710-00792-1 1AA6P1P1756-- (M8EA)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

Please read all instructions below and install this system properly.
Please read "SAFETY PRECAUTIONS" and "IMPORTANT SAFETY INSTRUCTIONS" on
OWNER'S MANUAL to install and place this system.
This system is supplied in 3 packages and they need to be installed.
Please make sure all the
parts are included.
If any part is missing, or if you have questions, contact a sales dealer.
CAUTION
WHEN INSTALLING THIS SYSTEM, BE CAREFUL NOT TO DAMAGE THE PROJECTION
SCREEN.
AND NEVER TOUCH THE SURFACE OF THE PROJECTION SCREEN AND
THE PROJECTION MIRROR DIRECTLY.
THEY MAY EFFECT THE PROJECTION IMAGE
QUALITY.
BE CAREFUL NOT TO DROP ANY PART OR TOOL LIKE SCREW INTO THE SYSTEM.
IF
IT SHOULD, CONTACT A SERVICE.
EXCEPT WHEN ADJUSTING THE PROJECTION MIRROR, NEVER TURN THE SYSTEM
ON UNTIL THE INSTALLATION IS FINISHED.
IT MAY CAUSE ELECTRICAL SHOCK OR
FIRE HAZARD.
REQUEST A SALES DEALER FOR INSTALLATION
Rear Projection Display
Installation Manual
Install the system following steps.
1AA6P1P1756--
(M8EA)
1.
CHECK CONTENTS IN PACKAGES
2.
ASSEMBLE BOTTOM CABINET
3.
JOINT TOP AND BOTTOM CABINETS
4.
SETUP PROJECTION MIRROR
5.
ADJUST PROJECTION MIRROR
THIS SYSTEM MUST BE INSTALLED BY 2 OR MORE PEOPLE
6.
ASSEMBLE STORAGE SPACES
7.
LOCK CABINET
710-00792-1