Sanyo PLC-XU47 Owners Manual - Page 42
Remote control, Lamp mode, Key lock, To change the code for the projector
View all Sanyo PLC-XU47 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Setting Lamp mode This function allows you to change brightness of the screen. ···· normal brightness ···· the controlled brightness according with input signal ···· lower brightness reduces the lamp power consumption and extends the lamp life ✔Note: Lamp mode is not switched into Eco mode ( is turned on. ) within 2 minutes after the projector Remote control This projector provides two different remote control codes; the factory-set, initial code (Code 1) and the secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. When operating the projector in "Code 2", both the projector and the remote control must be switched to "Code 2". To change the code for the projector; Select either "Code 1" or "Code 2" in this Setting Menu. To change the code for the remote control; Press and hold both the MENU and IMAGE buttons together for 10 seconds or more. After changing the code, make sure the remote control operates properly. USB This projector is equipped with the USB port for interactive operation between the projector and computer. Selects either of the followings as needed. ···· When using the PAGE ed buttons on the remote control unit. (p11) ···· When controlling the projector with a computer. This item is provided for future use. Not available now. Key lock This function locks operation of the top control and remote control. It is useful to prevent operation by an unauthorized person. ···· not locked. ···· locks operation of the top control. To unlock, use the remote control. ···· locks operation of the remote control. To unlock, use the top control. If the top control accidentally becomes locked and you do not have the remote control nearby, disconnect the AC power cord from the AC outlet, and then while pressing the SELECT button, reinsert the AC power cord. This will release the top control lock. RemCoOMtPeUTERcoVnIDEtOrol ON-OFF MENU VOLUME- SELECT VOLUME+ Press and hold MENU and IMAGE buttons for 10 seconds or more. D.ZOOM PAGE KEYSTONE NO SHOW AUTO PC P-TIMER IMAGE FREEZE MUTE Key lock Select Key lock and this box appears. Choose one of these with the Point ed button and select [Yes] to activate it. 42