Sanyo PLC-XU47 Owners Manual - Page 6

Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. - Do not put any flammable objects near the vent. - Keep the exhaust vent at least 3'(1m) away from any objects. - Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used. - Do not put anything on the cabinet. The materials put on the cabinet will not only get damaged but also cause fire hazard by heat. Cooling fans are provided to cool down the projector. This projector monitors internal temperature and control the running speed of the cooling fans. Installing the Projector in Proper Position Install the projector properly. Improper Installation may reduce the lamp life and cause a fire hazard. 20˚ Do not tilt the projector more than 20 degrees above and below. 20˚ Do not point the projector up to project an image. Do not point the projector down to project an image. Do not put the projector on either side to project an image. Air Intake Vent Moving the Projector When moving the projector, replace the Lens Cover and retract Adjustable Feet to prevent damage to the lens and cabinet. Exhaust Vent (Hot air exhaust) Air Intake Vent USE CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR - Do not drop or bump a projector, otherwise damages or malfunctions may result. - When carrying a projector, use a suitable carrying case. - Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a projector. To transport a projector through a courier or transport service, consult your dealer for their information. 6