Sanyo PLC-XU87 Owners Manual - Page 49
Ceiling, Input search, Terminal - mount
UPC - 086483065705
View all Sanyo PLC-XU87 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Setting Ceiling When this function is set to "On," the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Ceiling Rear When this function is set to "On," the picture will be left/right reversed. This function is used to project the image from rear of the screen. Terminal The COMPUTER IN 2 / COMPONENT IN / MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output. (See page 10) Select Computer 2 or Monitor Out with the Point 78 buttons. Computer 2 ........computer input Monitor Out .......monitor out Terminal function is not available when selecting Computer 2 to the input source. Change the input source to the others (Computer1 or Video) so that the Terminal function will be available. (pp.28, 29, 38, 39) Rear Input search This function detects the input signal automatically. When a signal is found, the search will stop. Use the Point 7 8 buttons to select one of the following options. Off.......... Input search will not work. On1 ........ Input search works under the following situation. - When pressing the INPUT button on the top control. - When pressing the COMPUTER button or VIDEO button on the remote control. On2 ........ Input search works under the following situation. - When turning on the projector by pressing the POWER ON-OFF button on the top control or the remote control. - When pressing the COMPUTER button or VIDEO button on the remote control. - When pressing the INPUT button on the top control. - When the current input signal is cut off.* *If the No show or Freeze function is active, cancel it to activate the Input search. It is also unavailable when OnScreen menu is displayed. ✔Notes: •While Input search is set to "On1" or "On2," the status of Input and Lamp are displayed every time the signal is switched. •Only the last selected input source can be detected. •If the INPUT button on the top control or COMPUTER or VIDEO buttons on the remote control is pressed during Input search is in progress, Input search will stop and go back to the previous input signal. 49