Sanyo PLV-60HT Owners Manual - Page 26

COMPUTER MODE Display area Selects area displayed with this projector. Select the resolution at the Display area dialog box. Display area H Adjustment of horizontal area displayed with this projector. Press POINT LEFT/RIGHT button(s) and adjust number to match the resolution of image. Display area V Adjustment of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) and adjust number to match the resolution of image. Press SELECT button at Display area icon and the Display area dialog box appears. Horizontal scale Adjustment of width of image. Press POINT LEFT/RIGHT button(s) for adjustments. To store the adjustment data. This Mode has parameters being stored. Vertical scale Adjustment of height of image. Press POINT LEFT/RIGHT button(s) for adjustments. NOTE : Display area (H/V), Horizontal scale and Vertical scale cannot be adjusted when "HDTV1035i" or "HDTV1080i" is selected on SYSTEM Menu (P23, 24). Fine sync and Total dots cannot be fully adjusted when "HDTV1035i" or "HDTV1080i" is selected on SYSTEM Menu (P23, 24). 3 Stored To store adjustment parameters, move a red frame pointer to Stored icon and then press SELECT button. Move a red arrow pointer to any of Mode 1 to 5 that you want to store to and then press SELECT button. Vacant Mode Shows values of "Fine sync," "Horizontal," "Vertical," "Display area H," and "Display area V." Stored icon To clear the adjustment data. Mode free To clear adjustment parameters previously set, move a red frame pointer to Mode free icon and then SELECT button. Move a red arrow pointer to the Mode that you want to clear and then press SELECT button. Other icons operates as follows. Reset Reset all adjust parameters on adjustment dialog box to previous figure. Quit Closes PC ADJUST MENU. Mode free icon Close the dialog box. 26