Sanyo PLV 70 Owners Manual - Page 37

SETTING SETTING MENU 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red-frame pointer to SETTING icon. 2 Press POINT DOWN button to move a red-frame pointer to item that you want to set and then press SELECT button. Setting dialog box appears. Language Language used in ON-SCREEN MENU is selectable from among English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Chinese, Korean and Japanese. Keystone When image is distorted, select Keystone. ON-SCREEN MENU disappears and Keystone dialog box is displayed. Correct keystone distortion by pressing POINT UP/DOWN/LEFT/RIGHT button(s). Refer to KEYSTONE ADJUSTMENT on page 20. Blue back When this function is "On," this projector will produce a blue image instead of video noise on screen when any input source is unplugged or turned off. SETTING MENU Set a red frame pointer to item and press SELECT button. SETTING Menu icon When pressing SELECT button at Language, Language Menu appears. Display This function decides whether to display On-Screen Displays. On ··· shows all On-Screen Displays. Off ···· sets On-Screen Displays disappeared except; q ON-SCREEN MENU q "Power off?" message Logo When this function is "On," projector displays our logo when starting up. Ceiling When this function is "On," picture is top / bottom and left / right reversed. This function is used to project image from a ceiling mounted projector. Rear When this function is "On," picture is left / right reversed. This function is used to project image to a rear projection screen. Move a pointer to item and then press POINT LEFT/RIGHT button(s). Ceiling function Power management This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain Lamp-life. (This projector is shipped with this function ON.) Power Management function operates to turn Projection Lamp off when input signal is interrupted and any button is not pressed over 5 minutes. This function operates as follows; 1. When any input signal is interrupted, "No signal" and counting down display appears (for 5 minutes). 2. After counting down for 5 minutes, projector lamp and READY indicator are turned off. 3. When READY indicator flashing, Projection Lamp can be turned on again (Power Management mode). In this Power Management mode, Projection Lamp is automatically turned on when input signal connected or projector is operated with any button on Top Control or on Remote Control Unit again. Rear function Time left until Lamp off. 37