Sanyo PLV-80L Instruction Manual, PLV-80L - Page 53
Projector Condition, Indicators, APPENDIX, INDICATORS AND PROJECTOR CONDITION
UPC - 086483059254
View all Sanyo PLV-80L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
APPENDIX When a input signal is digital from DVI terminal, refer to chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA1 D-WXGA2 D-WXGA3 D-WXGA5 ✳ D-SXGA1 RESOLUTION 640 x 480 720 x 480 (Progressive) 768 x 575 (Progressive) 800 x 600 1024 x 768 1366 x 768 1360 x 768 1376 x 768 1368 x 768 1280 x 1024 H-Freq. (kHz) 31.47 31.47 31.25 37.879 43.363 48.36 47.70 48.36 46.50 63.98 V-Freq. (Hz) 59.94 59.88 50.00 60.32 60.00 60.00 60.00 60.00 50.00 60.02 ON-SCREEN DISPLAY ✳ D-SXGA2 ✳ D-SXGA+ D-720p D-720p D-1035i D-1080i D-1080i D-1080psf/30 D-1080psf/25 D-1080psf/24 RESOLUTION 1280 x 1024 1400 x 1050 1280 x 720 (Progressive) 1280 x 720 (Progressive) 1920 x 1035 (Interlace) 1920 x 1080 (Interlace) 1920 x 1080 (Interlace) 1920 x 1080 1920 x 1080 1920 x 1080 H-Freq. (kHz) 60.276 63.97 45.00 37.50 33.75 33.75 28.125 33.75 28.125 27.00 V-Freq. (Hz) 58.069 60.19 60.00 50.00 60.00 60.00 50.00 60.00 50.00 48.00 ✳ Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed. NOTE : Specifications are subject to change without notice. INDICATORS AND PROJECTOR CONDITION Check the Indicators for projector condition. Indicators LAMP WARNING REPLACE TEMP. yellow red READY green LAMP red Projector Condition The projector is OFF. (The AC Power Cord is unplugged.) The projector is READY to be turned on with the POWER ON- ✽ OFF button. ✽ ✽ ✽ • • • on • • • flashing The projector is operating normally. The Warning Temp. Indicator flashes red to let you know the internal temperature of the projector exceeds the normal level. If the temperature goes up further, the projector will be turned off automatically and the Ready indicator will go out. When the projector is cooled down enough and the temperature returns to normal, the READY indicator lights green and the projector can be turned on. (The WARNING TEMP. indicator keeps flashing.) Check and clean the Air Filter. The projector is cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING TEMP. indicator stops flashing. Check and clean the Air Filter. • • • dim • • • off 53