Sanyo PLV Z2 Owners Manual - Page 42
Maintenance and Cleaning
View all Sanyo PLV Z2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Maintenance and Cleaning Warning Indicator The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. The projector is shut down and the WARNING indicator is flashing red When the temperature inside the projector exceeds the normal temperature, the projector is automatically shut down to protect the inside of the projector. The POWER indicator is flashing and the projector is being cooled down. When the temperature inside the projector returns to normal, the POWER indicator lights red and the projector can be turned on. NOTE G After the temperature inside the projector returns to normal, the WARNING indicator still continues to flash. When the projector is turned on again, the WARNING indicator stops flashing. TOP CONTROL POWER WARNING LAMP REPLACE WARNING flashing red Then check the items below. Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if ventilation slots are not blocked. Is the projector not installed near the ventilation duct of airconditioning equipment which may be hot? Install the projector away from the ventilation duct of air-conditioning equipment. Is the air filter clean? Clean the air filter or replace it with a new one. The projector is shut down and the WARNING indicator lights red When the projector detects an abnormal condition, it is automatically shut down to protect the inside and the WARNING indicator lights red. In this case, disconnect the AC power cord and reconnect it, and then turn the projector on once again for check. If the projector is turned off again and the WARNING indicator lights red, disconnect the AC power cord and contact the service station for check and repair. TOP CONTROL POWER WARNING CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER THE ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. LAMP REPLACE WARNING lights red 42