Sanyo VPC E1 Instruction Manual, VPC-E10EX - Page 49
to the 9-point focus mode
UPC - 086483067532
View all Sanyo VPC E1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
3 Gently press the shutter button. h Press the shutter button gently, taking care not to move the camera. h The image that was captured appears on the monitor as long as the shutter button is kept pressed (post view). 4 Release your finger from the shutter button. h The captured image is recorded. HINT When the focus mode (page 74) is set to the 9-point focus mode B... Focus indicator Target mark i A target mark & on the monitor shows the area the camera is focusing on. i The camera automatically determines the correct focus by measuring from 9 different focus points within the shooting area. If the target mark is at a position that is different from the point you wish to focus on, you can refocus, for example, by changing the shooting F5.2 1/102 angle. i The large target mark appears when the camera focuses on a wide area in Shutter speed Aperture the center of the screen. About the focus indicator Motion alert icon i A green focus indicator appears when the subject is successfully focused, or a red focus indicator when the camera was not able to focus the subject. The shutter speed and aperture are displayed i The shutter speed and aperture F5.2 settings are also displayed on the 1/2 monitor. You can use them as a reference when shooting. If the motion alert icon appears... i During still image shooting, if the shutter speed is slow and the possibility that the image may be blurred due to camera shake becomes high, the motion alert icon may appear on the monitor. In this case, use a tripod to stabilize the camera when shooting, or set the flash operation mode to automatic (page 59). i When shooting with the fireworks H scene function, the motion alert icon always appears, but this is normal. English 38