Sanyo VPC HD700 Instruction Manual, VPC-HD700EX - Page 55

SETUP Turning on the camera when the power save (sleep) mode is active In order to preserve battery pack power, the power save (sleep) function will automatically turn off the camera after 1 minute of no use during shooting, or 5 minutes of no use during playback (factory-preset setting). i When the power save mode is active, you can restore the power by any of the following methods: h Move the REC/PLAY switch. h Press the ON/OFF button. h Press the [ ] or [ ] button. h Press the SET or MENU button. h Push the zoom switch. h Move the SIMPLE/NORMAL switch. h Press the FULL AUTO button. * When the MENU button is used to turn on the camera, the screen to set the operation sounds (page 145) appears. i After the power save mode has been active for about 1 hour, the camera will switch to the standby mode. In this case, you can restore the power by pressing the ON/OFF button, or by closing and then opening the monitor unit. i When the AC adaptor is connected, the power save mode will become active about 10 minutes after the camera is turned on (factory-preset setting). i The user can specify the time elapsed before the power save mode is activated (page 160). i When the camera is connected to a computer or printer, the power save mode becomes active after about 12 hours. Turning off the camera 1 Press the ON/OFF button for at least 1 second. h The camera turns off. English 40