Sanyo XP30 Instruction Manual, PLC-XP30 - Page 22

BASIC OPERATION KEYSTONE ADJUSTMENT If the picture has keystone distortion, correct image with KEYSTONE adjustment. 1 Press the KEYSTONE v/w button on the Remote Control Unit or select the Keystone on SCREEN MENU. (Refer to page 31, 35.) The message "Keystone" is displayed. 2 Correct the Keystone distortion by pressing the KEYSTONE v/w button or the POINT UP/DOWN button(s). Press the KEYSTONE v button or the POINT UP button to reduce the upper part or the image, and press the KEYSTONE w button or the POINT DOWN button to reduce the lower part. Keystone The message disappears after 4 seconds. Reduce the upper width with the KEY STONE v button or the POINT UP button. Reduce the lower width with the KEY STONE w button or the POINT DOWN button. NO SHOW FUNCTION Press the NO SHOW button on the Remote Control Unit to black out the image. This function is cancelled when the NO SHOW button is pressed again or any other function button is pressed. No show The message disappears after 4 seconds. PICTURE FREEZE FUNCTION Press the FREEZE button on the Remote Control Unit to freeze the picture on-screen. This function is cancelled when the FREEZE button is pressed again or any other function button is pressed. P-TIMER FUNCTION Press the P-TIMER button on the Remote Control unit. The timer display "00 : 00" appears on the screen and the timer starts to count the time (00 : 00 ~ 59 : 59). To stop the P-TIMER, press the P-TIMER button. And then, press the P-TIMER button again to cancel the P-TIMER function. 22