Sanyo XP30 Instruction Manual, PLC-XP30 - Page 31

COMPUTER MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT button. Another dialog box SCREEN MENU will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the function that you want to select and then press SELECT button. True To make the image into its original size, select True in the dialog box. When the original image size is larger than the screen size (1024 x 768), the image can be panned by pressing the POINT UP/DOWN/LEFT/RIGHT buttons. Keystone When the image is distorted vertically, select Keystone in the dialog box. The ON-SCREEN MENU and SCREEN MENU disappears and the message "Keystone" is displayed. Correct the Keystone distortion by pressing the KEYSTONE v/w button or the POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT on page 20. Digital Zoom To adjust the image size or pan the image, select Digital zoom in the dialog box. The ON-SCREEN MENU and SCREEN MENU disappears, and the magnifying glass icon and the message "D. Zoom" is displayed. This projector also enters Digital Zoom mode by pressing the D.ZOOM v/w button on the Remote Control Unit. Refer to the following for operation. Expand function To expand the image size, press the D.ZOOM v button or the SELECT button. The image is magnified by degrees. Compress function To compress the image size, press the D.ZOOM w button or the RIGHT CLICK button. The size of image is reduced by degrees. Panning function To pan the image, press the POINT UP/DOWN/LEFT/RIGHT buttons. Panning function can work only when the image is larger than the screen size. To cancel Digital Zoom mode, press any button except D.ZOOM v/w, SELECT, RIGHT CLICK, or POINT button. To adjust the image to 1024 x 768, press NORMAL button. Move the arrow to the function and press the SELECT button. NOTE q The True and the Digital Zoom cannot be operated when "RGB," "HDTV1035i" or "HDTV1080i" is selected on SYSTEM MENU (P24 and 25). q This projector cannot display any resolution higher than 1280 X 1024. If your computer's screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting the projector. q The image data in other than XGA (1024 x 768) is modified to fit the screen size in the initial mode. q The normal "Panning Operation" may not function properly if the computer system prepared with the "PC Adjust" is used. 31