Sanyo XP30 Instruction Manual, PLC-XP30 - Page 33

VIDEO MODE SELECTING COLOR SYSTEM 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SYSTEM and press the SELECT button. Another dialog box SYSTEM MENU will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to "Auto", and then press the SELECT button. VIDEO SIGNAL FROM VIDEO JACK OR S-VIDEO JACK Auto The projector automatically detects the incoming Video system, and adjusts itself to optimize its performance. When the Video System is PAL-M or PAL-N, select the system manually. This box indicates the system being selected. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce the proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. Move the arrow to the Mode and press the SELECT button. VIDEO SIGNAL FROM Y, Pb/Cb, Pr/Cr JACKS Auto The projector automatically detects the incoming Video signal, and adjusts itself to optimize its performance. COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce the proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i. This box indicates the system being selected. Move the arrow to the Mode and press the SELECT button. 33