Sanyo XU101 Instruction Manual, PLC-XU101 - Page 29

Computer Input Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon. PC Adjust Menu PC Adjust Menu icon 2 Press the Point ed buttons to move the red frame pointer to the item that you want to adjust and then press the SELECT button to display the adjustment dialog box. Press the Point 7 8 buttons to adjust the value. Fine sync Use the Point 7 8 buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31). Total dots Use the Point 7 8 buttons to adjust the number of total dots in one horizontal period to match your PC image. Move the red frame pointer to an item and press the SELECT button. Status (Stored / Free) of the selected Mode. Selected Mode Press the Point 7 8buttons to adjust the value. Horizontal Use the Point 7 8 buttons to adjust the horizontal picture position. Vertical Use the Point 7 8 buttons to adjust the vertical picture position. Press the SELECT button at this item to adjust other items. Current mode Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer. Clamp Use the Point 7 8 buttons to adjust the clamp level. When the image has dark bars, try this adjustment. Press the SELECT button at the Current mode item to show the information of the connected computer. 29