Sanyo XU101 Instruction Manual, PLC-XU101 - Page 7
Installing the Projector in Proper Directions, Positioning Precautions
UPC - 086483067921
View all Sanyo XU101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture upward, downward, or backward, perpendicular to the plane of the screen as shown in the figure below. 50º 50º Bottom Downward (Usual) Front Upward Bottom Upward Front Downward 40º Fan Control 40º "Max" 180º 0º Fan Control "Normal" Be sure to set the Fan control in MAX in the setting menu when the projector is inclined between +40 degrees to +140 degrees to the horizontal plane (p.49). Positioning Precautions Avoid positioning the projector as described below when installing. 10˚ Do not tilt the projector more than 10 degrees from side to side. 10˚ Do not put the projector on either side to project an image. 10˚ 10˚ In upward projection, do not tilt the projector over 10 degrees right and left. In downward projection, do not tilt the projector over 10 degrees right and left. 10˚ 10˚ 7