Sanyo XU101 Instruction Manual, PLC-XU101 - Page 46
On start, Lamp control, Power management, Select one of the operations.
UPC - 086483067921
View all Sanyo XU101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Setting Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the input signal is interrupted and no button is pressed for a certain period. When the input signal is interrupted and no button is pressed for 30 seconds or more, the timer display with "No signal" message will appear. The countdown will start to turn off the lamp. Select one of the operations. Ready When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the top control or remote control unit is pressed. Shut down ......When the lamp has been fully cooled down, the power will be turned off. Off Power management function is off. Then set the countdown timer with the Point 7 8 buttons. ✔Note: Factory default is "Ready: 5 min." Power management Time left before Lamp is off. Press the SELECT button at Power management and this box will appear. Choose one of three settings with the Point 7 8 buttons, and go to the timer with the Point ed buttons and set time with the Point 7 8 buttons. On start When this function is "On", the projector will be automatically turned on just by connecting the AC power cord to a wall outlet. ✔Note: Be sure to turn the projector off properly (see "Turning Off the Projector" on page 20). If the projector is turned off in the incorrect sequence, the On start function does not operate properly. Lamp control This function allows you to change brightness of the screen. Auto The brightness according to the input signal (between High and Eco mode). High Brighter than the Normal mode. Normal ....... Normal brightness Eco Lower brightness reduces the lamp power consumption and extends the lamp life. 46